Copying A Document - Minolta Di250f Operator's Manual

2-2

1. Copying a Document

There are two ways to copy - one using the Document Feeder, and the other using the Book Scanner.
Multiple documents can be copied at a time when the Document Feeder is used. The Book Scanner is
used to copy documents that cannot be run through the Document Feeder, such as books and catalogues.
Auto-mode Screen:
• It is ready to copy whenever this screen is displayed.
• If a four digit (three-digits for the Di250f) or longer number, or a number beginning with '0' (facsimile
number), is input, it automatically switches to facsimile transmission mode.
Copy Screen:
• It is ready to copy whenever this screen is displayed.
FAX Screen:
• When this screen is displayed, press the Copy key to copy.
Memory Recall Function:
• This product first scans the documents and then stores them in the memory before starting to copy them.
The image data of the document stored in the memory can be saved after copying and copied
repeatedly. This function is called memory recall.
• Use of the Memory Recall function must be set in advance. "Settings for Copying"
Copying with the Document Feeder
Load the document in the Automatic
1
Document Feeder.
"Handling Documents"
2 Press the Copy key.
Utility Mode Check
Start
p. 1-20
Pause Fax Copy
Access
Interrupt
Stop
Panel Reset
1166O346AB
1166O347AB
Use the 10-key Pad to enter the desired
3
number of copies.
Useful Tips
• To change the number of copies, press the
key.
C
• Up to 999 copies can be set for Di350f. For
Di250f, up to 99 copies can be set.
p. 9-31
1171P009EA