Registering Self-Id To Be Printed Or Displayed At The Destination; Self-Id - Minolta Di250f Operator's Manual

2. Registering Self-ID to be Printed or Displayed at the Destination

Self-ID

If your name and facsimile number are registered as the ID in advance, that ID is printed on the
management report or displayed on the display panel at the destination's facsimile. It is convenient for
allowing the destination to confirm who sent a document.
Useful Tips
• Up to 12 alphanumeric characters and symbols can be used to register the ID.
• The same procedure can be used to change the registered ID.
• It may not be possible to display Self-ID at the destination depending on its facsimile. In this case,
Self-Telephone Number is displayed.
Before Starting Operations
Initial Setting
Touch
1
Management screen.
"Accessing the Administrator Management
Screen" p. 9-2
ID
2 Select , and touch
Enter Self-ID and touch
3
"Entering Characters"
on the Administrator
1171P186EA
Self-ID
.
1171P187EA
Enter
.
p. 7-11
1171P188EA
Confirm the registered details when the
4
screen returns to the same one as in step 2.
Enter
Touch if they are correct.
Useful Tip
Self-ID
To modify, touch
Enter
Touch repeatedly until the screen
5
returns to the initial screen.
9-3
to re-register.