Minolta Di250f Operator's Manual page 89

7. Sending Documents in their Original Size Irrespective of the Recipient's Paper Size
No Reduction
Touch
6
Enter .
Useful Tip
When Auto Size is selected, this equipment
automatically adjusts the size of the document to
that of the paper used by the recipient when
No Reduction
transmitting. When
the area of the document that will fit on the paper
used by the recipient's facsimile will be sent at its
original size.
Select the destination.
7
"Sending a Document"
"Using One-Touch Dialing for
Transmission" p. 3-7
"Using Abbreviated Dialing for
Transmission" p. 3-8
Press the Start key.
8
Transmission starts.
Useful Tip
The setting for size reduction returns to
Auto Size after each transmission.
, and then touch
1171P050EA
is selected,
p. 3-2
Scanning the Document when Nonre-
duction Mode is Selected
When nonreduction mode is selected, transmission
is as follows.
<Direction of Document Insertion>
• When using the Automatic Document Feeder.
• When using the Duplexing Document Feeder.
<How the Document is Transmitted>
• When a ledger-size document is sent in
nonreduction mode and received on letter size
paper.
Document
ledger size
NOTES
• After transmission, the document may be
reduced in size when printed depending on the
model of the destination's facsimile.
• Note that when transmitting to the same
model on this machine, the reduction mode
may be set at the receiver side due to the
factory default setting.
3-15
1166O392AA
1166O355AA
Transmitted image
letter size
1166O356AA