Minolta Di250f Operator's Manual page 95

Useful Tips
• The sizes of documents that can be received are ledger (11"×17"), legal (8-1/2"×14"), letter
letter .
• If paper that is not the same size as the original document is installed in the copier, one size larger
paper is used or the document image is automatically reduced.
For example, if a ledger-size document is received by the copier where only letter-sized paper is
loaded, the document is reduced to the size of letter.
"Settings of Handling the Received Documents"
• When letter size documents are received, they are automatically rotated by 90° and can be printed
even though the documents were inserted in a different direction to the paper (Rotation Print).
• A received document cannot be printed on paper from the Manual Bypass Tray.
When Receiving Long Documents
When a document is received that is longer than the normal paper sizes (letter or ledger (11"×17")), the
document image is reduced as shown below. In this case, the optimal reduction ratio is automatically
selected to fit the image onto the paper.
Received document (original size)
Useful Tip
If the received document is too long to be printed on the paper even when reduced by 60%, the image is
divided and printed on more than one page. In this case, the transition area (where the image is divided)
is printed on both pages. (If larger paper is installed, the image will be printed on it without being
divided.) The maximum reduction ratio can be changed. The "Cut off" mode can also be selected, in
which case the excess area is ignored when printing. When "Cut off" mode is selected, the maximum
length to be cut off can be set.
"Setting the Reception Mode"
p. 9-12
A
Reduction
A
Paper
p. 9-25
10. Receiving a Document
1166O359AA
3-21
and