Minolta Di250f Operator's Manual page 217

Useful Tips
• Standard:
Touch this to select the appropriate paper by
judging the length and width of the received
document.
• Width Priority:
Touch this to select paper that is not wider
than the received document.
• Constant Width Mode:
Touch this to only select paper with the same
width as the received document.
<Setting for the Unselectable Cassette>
Paper
• Select , and touch
Unselectable Cassette
• Select the cassette(drawer) to be excluded
when using automatic paper selection, and
Enter
touch .
NOTE
When a paper cassette(drawer) in which
recycled paper or special paper is loaded
(Special Paper Settings on page 9-35), the
paper cassette(drawer) is not used in facsimile
reception. In this case, the paper
cassette(drawer) does not need to be set to
"forbidden to use" additionally.
<Setting for the 2-to-1 Reception>
Paper
• Select , and touch
• Select ON or OFF
1 Reception setting and touch
.
1171P245EA
2-TO-1 RX
.
for the initial 2-to-
Enter .
1171P246EB
16. Setting the Reception Mode
<Setting for Rotation Print>
Paper
• Select , and touch
Rotation Print
.
• Select Sort ON ,
, and touch
Rotation OFF
<Setting for Handling the Long
Documents>
LongDoc
• Select
Long Document
• Select the handling method for long
documents, and touch
Useful Tips
• Reduction:
Touch this to reduce the document in size
when it is printed if the received document is
longer than the paper.
• Cut Off:
Touch this to cut off the edge of the document
when it is printed if the received document is
longer than the paper.
9-27
Sort OFF or
.
Enter
1171P247EA
, and touch
.
1171P248EB
Enter .
1171P249EA