Reception - Minolta Di250f Operator's Manual

Reception

Condition
The received image is
unclear.
A blank sheet is printed
on the reception paper.
Automatic reception is
impossible.
Streaky lines appear on
the received paper.
Cause
The paper is damp.
Toner has run out.
The toner bottle is not
correctly set.
There is a problem with the
line condition or the facsimile
at the destination.
Toner has run out.
The document was placed
facing the wrong way by the
sender.
Manual reception mode
has been selected.
Memory is full.
An alarm is displayed.
There is a problem with the
condition of the line or the
sender's facsimile.
Countermeasures
Replace the paper.
Replace the toner bottle.
Reset the toner bottle correctly.
Check by using this machine to
make a copy. If the copied
image is clear, try sending it
again.
Replace the toner bottle.
Contact the sender.
Set automatic reception mode.
If paper has run out, insert
additional paper to print out the
documents stored in the
memory.
Follow the instructions to reset
the alarm.
Check by using this machine to
make a copy. If the copied
image does not show any
streaky lines, ask the sender to
re-send.
14-21
4. Troubleshooting
Reference
page
13-2
13-8
13-8
-
13-8
-
9-25
13-2
14-3
-