Minolta Di250f Operator's Manual page 318

14-24
6.Condensation
Anti-Condensation Procedure/Anti-Condensation Function
Condensation occurs around the document scanning area when subjected to rapid atmospheric
temperature changes, such as when the room temperature rapidly rises by turning on the heater. When
condensation occurs the copied (or transmitted) image may be distorted. This section describes the anti-
condensation procedure, and how to set the anti-condensation function.
Anti-Condensation Procedure:
A lamp in the document scanning area lights for five minutes and evaporates any condensation.
Anti-Condensation Function:
This function can be set to automatically turn on at a predetermined time every day. Enter the time using
the 24-hour clock.
Anti-Condensation Procedure
Press the Utility key.
1
Select and touch
2 Maint.
Starts to evaporate any condensation.
Touch Enter repeatedly until the screen
3
returns to the initial screen.
Setting the Anti-Condensation
Function
1
.
Anti-dew
1171P393EA
2
Useful Tips
• Touch
• To re-enter, press the
3
Touch Anti-dew on the Administrator
Management screen. "Accessing the
Administrator Management Screen"
Enter the start time to evaporate the
condensation and touch
Hour Minute
or
the time using the 10-key Pad.
When Cancel is touched, this function is
deactivated.
C
enter.
Touch Enter repeatedly until the screen
returns to the initial screen.
p. 9-2
1171P394EA
Enter .
1171P395EA
, and then enter
key and re-