Sending A 2-Sided Document; 2-Sided Transmission - Minolta Di250f Operator's Manual

9. Sending a 2-Sided Document

2-Sided Transmission

2-Sided documents can be transmitted.
NOTES
• A Duplexing Document Feeder is required for automatic feeding of 2-Sided documents.
• Any document sent by using 2-Sided Transmission function can only be printed on one side of the
paper at the recipient's facsimile.
• The 2-Sided Transmission and Real Time Transmission function cannot be used simultaneously.
• The 2-Sided Transmission setting is reset after each transmission.
Procedure for 2-Sided Transmission
Load the document in the unit with the front
1
side facing up.
"Handling Documents"
Press the Fax key.
2
Set 1
Select from
3
2-Sided TX .
Select the destination.
4
Useful Tip
"Sending a Document"
Touch Dialing for Transmission"
"Using Abbreviated Dialing for Transmission"
p. 3-8
p.1-20
FAX Menu
, and touch
1171P132ED
p. 3-2 "Using One-
p. 3-7
1166O302AB
Press the Start key.
5
Scanning is displayed.
Place the document in the unit with the
6
reverse side facing up.
NOTE
This screen is not displayed if the Duplexing
Document Feeder is used.
Press the Start key.
7
Transmission starts.
5-15
1171P133EA