Minolta Di250f Operator's Manual page 298

14-4
1. If the Following Icons and Alarm Messages Are Displayed
Messages
Image data has caused memory
overflow. Your copy job has
been canceled.
Memory is full.
Original left on the glass.
Matching paper size isn't
available. Reselect paper size.
Matching paper size isn't
available. Please set matching
paper in the 1st Drawer.
Auto Size mode cannot be used
with the selected paper size.
Please select a zoom ratio.
Replenish paper.
Please remove paper in Bypass
Tray.
This mode cannot be selected
with the Interrupt mode.
This mode cannot be selected.
Paper drawer has been
designated as "Not for 2-sided
Copies".
This mode cannot be selected
with the Duplex mode.
Causes
Memory is full.
Memory is full.
A document remains on the glass
surface (Book Scanner).
There is no appropriate paper
size in the paper drawer that
meets document size and scaling
factor currently specified.
The appropriate paper size is not
installed in the 1st Drawer.
The scaling factor calculated
from the selected paper size and
the document size is not within
the possible range of 0.250 to
4.000.
There is no paper in the selected
tray.
Paper remains on the Manual
Bypass Tray.
A function that does not accept
an interruption is selected.
A paper drawer with paper that
cannot be printed on both sides is
selected for 2-Sided copying.
A paper drawer with paper that
cannot be copied on both sides is
selected after 2-Sided copying is
selected.
Countermeasures
•Retry copying after reducing the
number of document pages.
•If there are some documents
waiting to be printed, print out
first the documents already
saved in the memory.
•Reserve for transmission after
memory becomes available.
•If there are some documents
waiting to be printed, remove
the documents in the memory.
Remove the document from the
glass surface (Book Scanner).
•Select the paper. "Selecting the
Copy Paper Size for Copying"
p. 2-5
•Load the paper. "Loading
Paper" p. 13-2
•Load the indicated paper.
"Loading Paper"
p. 13-2
•Set the scaling factor. "Selecting
the Zoom Ratios for Copying"
p. 2-9
•Reselect the paper. "Selecting
the Copy Paper Size for
Copying" p. 2-5
Load paper. "Loading Paper"
p. 13-2
Remove the paper from the
Manual Bypass Tray.
Reset interruption or function
currently selected.
•Reselect the paper. "Selecting
the Copy Paper Size for
Copying" p. 2-5
•Cancel 2-Sided copying.
p. 4-16
•Reselect the paper. "Selecting
the Copy Paper Size for
Copying" p. 2-5
•Cancel 2-Sided copying.
p. 4-16