Factory Setting; Factory Setting Menu Screen; Factory Setting Function Setting Procedure - Minolta EP5000 General, Mechanical/Electrical

Interleaf EP5000/EP4000 SWITCHES ON PWBs, TECH. REP. SETTINGS
97.04.01
1149SBS0600A
6

FACTORY SETTING

D Factory Setting is used to make adjustments at the factory.
1149SBS0601A

6-1. Factory Setting Menu Screen

1149SBS0602A

6-2. Factory Setting Function Setting Procedure

<Setting Procedure>
1. Set the copier into the Tech. Rep. mode by pressing the following keys in this order.
á
Stop key
2. Enter the Factory Setting mode by pressing the following keys in this order.
á
Stop key
3. Select the particular Factory Setting function to be set.
4. Make the necessary settings by following the instructions given sequentially on the screen.
NOTE: The function selected is highlighted.
<Exiting the Mode>
D Press the Panel Reset key on the control panel.
1149O424CA
á
0 Stop key
Start key
S-41
á
1