Table of Contents
Advertisement
XVIII. Setting gradation adjust
1. Load A4 or Letter size papers in the tray.
2. Display the Service Mode screen.
(For details of how to display the Service Mode
screen, see the service manual.)
3. Touch "Printer Adjustment"
ment".
4. Touch "Max. Density Adjustment"
"OK".
Test patterns are printed on two A4 or Letter size
papers.
5. Touch "Scan".
Using the steps below, follow the panel display to
start scanning the test patterns:
(1) Place the test pattern (Max. density adjustment
sheet 1) face down on the document glass,
and close the original cover.
(2) Press the [Start] key.
The machine will start reading the test pattern.
(3) Similarly, repeat steps (1) and (2) for the other
test pattern (Max. density adjustment sheet 2).
6. After the scanning of the test patterns is com-
plete, return to the "Gradation Adjustment"
screen.
"Gradation Adjust-
"Print"
A3EW11A022AA
A3EW11A022BA
E-11
7. Touch "Gradation Adjustment"
Test pattern will then be produced on the A4 or
Letter size paper.
8. Touch "Scan".
Using the steps below, follow the panel display to
start scanning the test patterns:
(1) Place the test pattern (Gradation adjustment
sheet) face down on the document glass, and
close the original cover.
(2) Press the [Start] key.
The machine will start reading the test pattern.
9. After the scanning is complete, touch "Close"
three times.
XIX. Date/Time setting
1. Press the [Utility/Counter] key, and touch "Admin
Settings".
Enter Admin password (factory set-
ting: 12345678).
Touch "Machine Settings"
"Date & Time Settings".
2. Set the following settings:
(1) Touch "DATE"
Set the date.
(2) Touch "Time"
Set the time.
(3) Touch "Time Zone"
time zone.
Touch "OK".
3. Touch "Close" three times.
"Print"
"OK".
A3EW11A022CA
Touch "OK".
Touch "OK".
Touch "+" / "-" and set
Advertisement
Table of Contents
