Making Settings Related To Output Signals - Sony DFS-900M Operating Instructions Manual

Making Settings Related to Output Signals

Selecting output signals for AUX output
88
Basic Switcher Settings
Knob
F4
a) Valid only when the BKDF-911 2 SD Video Input Board is installed
In addition to the four standard video outputs (PGM1/2 and AUX1/2), you can
use up to 12 video outputs by adding option boards.
You can freely assign output signals to the AUX1 and AUX2 outputs, and to the
outputs of output expansion boards. These freely assigned signals may be input
signals, signals processed internally by the switcher, program outputs, or
multi-view output.
When the input is SDI signals (HD-SDI or SD-SDI), you can select whether to
output ancillary data such as multiplexed audio and timecode.
Note
The signals output from the PGM1 and PGM2 outputs cannot be changed.
BKDF-902
1
When using the BKDF-901: Press the AUX button.
When using the BKDF-902: Press one of the AUX1 to AUX10 buttons.
Note
The AUX3 to AUX10 buttons that correspond to channels on installed
output expansion boards are enabled (buttons with no corresponding
channels are not enabled). When you are using the BKDF-961 and
BKDF-962 output expansion boards, some output channel numbers are
invalid. For details, see page 38.
The Aux (AUX output assignments) sub menu appears in the display panel.
Parameter Description
Hue Adjust the hue
Setting range
0.0 to 359.5
BKDF-901