Inserting Keys By A Mix Transition; Inserting Keys By A Wipe Or Dme Wipe Transition - Sony DFS-900M Operating Instructions Manual

2
Press the next transition selection button that selects
the key you have set up (KEY1 to KEY4, multiple
selections possible), lighting the button.
3
Press the CUT button.
The key video is inserted instantly into the background
video.
When the key is inserted, the key on indicator (red)
above the button lights.
When you press the CUT button once more, the
indicator goes out and the video returns to the original
background video.

Inserting Keys by a Mix Transition

1
Carry out steps 1 and 2 of the previous section,
"Inserting Keys by a Cut Transition".
2
Press the MIX button, lighting it.
3
Set the transition rate as required.
For information about how to set transition rates, see
"Setting Transition Rates" (page 116).
126
Using Keys to Compose Video
BKDF-901
BKDF-902
4
Use an AUTO TRANS button or the fader lever to
execute the mix transition.
For information about how to execute a transition, see
"Using Transitions to Switch to the Next Video (Mix
and Wipe)" (page 110).
Inserting Keys by a Wipe or DME
Wipe Transition
BKDF-901
BKDF-902
1
Set up the key signal.
For information about how to set up keys, see "Setting
Up Keys" (page 121).
2
Press the next transition selection button that selects
the key you have set up (KEY1 to KEY4, multiple
selections possible), lighting the button.
3
When using the BKDF-901: In the transition block,
press the WIPE button or the DME button, lighting
the button.