Connector
Connector
Output signals
number
name
Composite
1
COMP/Y
Composite
signal
2
B-Y
Not used
3
R-Y
Not used
4
COMP
Composite signal
For signal settings, see "Specifying the signal type of
analog output signals" (page 91).
BKDF-962 2 DVI Output Board
DVI OUT (DVI output) 1 and 2 connectors
DVI OUT (DVI output) 1 and 2 connectors (DVI-I
type)
Connect a computer display which is equipped with DVI
input connectors.
For signal settings, see "Specifying the signal type of DVI
output signals" (page 93).
BKDF-990 Power Supply Unit
Power switch B
Power switch B
You can install the BKDF-990 Power Supply Unit in the
lower rack of the processor unit. You can then use power
switch B to turn it on and off as a backup power supply.
For details, see "Installing the BKDF-990 Power Supply
Unit" (page 50).
Other Options
For details about the following options, see "Installing
Function Expansion Boards" (page 45).
• BKDF-940 2CH DME Board
• BKDF-950 Multi Viewer Board
Component
Luminance
signal (Y)
Color difference
signal (B-Y)
Color difference
signal (R-Y)
31
Options