Table of Contents
Advertisement
Tip
When selecting a PC monitor or touch panel monitor to connect to this switcher,
select one with at least SVGA (800×600) resolution and the ability to adjust the
resolution automatically.
To calibrate a touch panel monitor
If you have connected a touch panel monitor, you must calibrate it when you
power the switcher on for the first time.
BKDF-902
1
When using the BKDF-901: If the SHIFT button of the DME/SETUP
block is not lit, press it to light it.
When using the BKDF-902: Skip to step 2.
2
Press the SYSTEM button.
A settings sub menu of the System sub menu appears in the display panel.
3
Press the h or H button in the numeric keypad until the Update sub
menu appears.
"Update" appears in the sub menu title display area. If it is already displayed
there, you can skip this step.
4
Press the F2 knob and hold it down for one second or longer.
A calibration screen appears on the touch panel monitor.
BKDF-901
Menu Operations
65
Advertisement
Table of Contents
