Dme/Setup Block - Sony DFS-900M Operating Instructions Manual

Button display Function
J Switches to the next menu.
EVENT Switches to event mode.
SEQ Switches to sequence mode.
h Switches to the previous sub menu.
H Switches to the next sub menu.
Buttons used when the EVENT button is lit (event
mode)
Button display Function
EVENT Exits event mode and switches to menu
mode.
STORE Stores an event.
RECALL Recalls an event.
INSERT Specifies settings to be recalled in event
mode.
Buttons used when the SEQ button is lit
(sequence mode)
Button display Function
SEQ Exits sequence mode and switches to
menu mode.
STORE Stores a sequence.
X Pauses play of a sequence, or restarts
play.
LOOP Specifies loop play as the play mode of a
sequence.
DIR Reverses the direction of play.
RECALL Recalls a sequence.
Bx Starts play of a sequence, or stops play.
NEW Clears sequence memory.
DELETE Deletes a sequence or key frame.
INSERT Inserts a key frame.
h, H Moves the current key frame.
j, J Switches the sequence menu.

8 DME/SETUP Block

This block provides buttons for use in DME setting and
setup operations.
When the SHIFT button on the right side is not lit, the
buttons function as DME setting buttons (top-side
indications on the buttons). When the SHIFT button is lit,
the buttons function as setup buttons (bottom-side
indications on the buttons).
4 SHIFT button
3 USER/STILL button
1 DME setting buttons
2 Setup buttons
a DME setting buttons
BASIC (basic DME settings) button: Displays a menu
that allows you to make basic settings for DME
images, such as position and rotation angle.
BORDER button: Displays a menu that allows you to set
the color, width, softness and other attributes of
borders added to DME images.
SUB EFF (sub effect) button: Displays a menu that
allows you to add a Chroma Control sub effect to a
DME image.
WARP button: Displays a menu that allows you to set up
various warp patterns that can be applied by DME.
After the menu appears, each press of the WARP
button switches to the next pattern that can be set up.
LIGHT (light source) button: Displays a menu that
allows you to specify and adjust light source effects
added to 3D effects.
(Not supported in this version.)
b Setup buttons
AUX (auxiliary) button: Displays an AUX bus output
menu that allows you to select the source, format, and
level of output signals.
MATTE button: When pressed with the SHIFT button lit,
displays a menu that allows you to select the
luminance, saturation, and hue of internally generated
color matte signals.
INPUT button: When pressed with the SHIFT button lit,
displays a menu that allows you to make settings
related to input signals, for example make settings for
assigning input signals to a bus.
MV (multi-view) button: When pressed with the SHIFT
button lit, displays a menu that allows you to select the
number of child windows in the optional multi-view
display and to select the signals to assign to each child
window.
SYSTEM button: When pressed with the SHIFT button
lit, displays a menu that allows you to make system
settings, such as the video format, the system delay,
and the date and time.
STATUS button: When pressed with the SHIFT button
lit, displays a menu that allows you to check status
information such as the installed option boards, the
firmware version, and alarms.
BKDF-901 1M/E Control Panel
17