Table of Contents
Advertisement
Other Operations and
Settings
Backing Up Data
You can use the Data Backup sub menu of the Setup menu
to back up, recall, and clear the various types of data used
by the switcher.
Backup or recall: Save backup data to a USB flash drive
connected to the USB MEMORY connector, or recall
the data as required.
Clear: Clear the data saved in the USB flash drive
connected to the USB MEMORY connector or in the
memory of the control panel.
The following types of data can be targeted.
• All data: System data and file data
• System data: Data such as events, I/O settings, initial
values, and status data
• File data: Still image file data stored in the control panel,
user pattern data, and sequence data.
To back up, recall, and clear data, use sub menus of the
Data Backup sub menu.
Sub menu
All Backup
System Backup
File Backup
166
Backing Up Data
Operation
Back up, recall, and clear all data
Back up, recall, and clear system data
Back up, recall, and clear file data
Chapter
To display the Data Backup sub menus
BKDF-901
BKDF-902
1
When using the BKDF-901: If the SHIFT button in
the DME/SETUP block is not lit, press it to light
it.
When using the BKDF-902: Skip to step 2.
2
Press the SYSTEM button.
The most recently used sub menu appears in the
display panel.
8
Advertisement
Table of Contents
