Option Board Information; Software Version Information; Alarms - Sony DFS-900M Operating Instructions Manual

Option Board Information

The Board In/Out/Op1/Op2 sub menus allows you to
check whether option boards are installed.
Knob Parameter Description
F1
F2
F3
F4

Software Version Information

The Firmware sub menu allows you to check software
version information.
The software name and version information appear in the
display areas of the F1 to F4 knobs.

Alarms

The Alarm sub menu allows you to check the various
alarms.
Knob Parameter Description
F1 PWR
170
Status Information
Settings
s: 4SDI Input
Displays
information about Board
a: SD analog
the board(s) in
input expansion input board
d: DVI input
slots.
board
-: Not installed
s: 4SDI Output
Displays
information about Board
a: SD analog
the board(s) in
output expansion output board
d: DVI output
slots.
board
-: Not installed
dme: 2CH DME
Displays
information about Board
-: Not installed
the board(s) in
the DME1 and
DME2 sockets.
mv: Multi Viewer
Displays
information about Board
-: Not installed
the board(s) in
the MV1 and MV2
sockets.
Settings
Single A: Only
Displays
information about one standard
the installed power supply
power supply unit is
unit(s) in the installed.
Single B: Only
processor unit.
one optional
power supply
unit is
installed.
Dual: Both a
standard and
an optional
power supply
unit are
installed.
Knob Parameter Description
F2 PS Displays the
alarm status of
the power supply
unit(s) in the
processor unit.
F3 FN Displays the
alarm status of
the fan.
F4 CP Displays
information about
the installed
power supply
unit(s) in the
control panel.
Settings
ok: Operation is
normal.
ng: An error has
been detected.
ok: Operation is
normal.
ng: An error has
been detected.
ok: Operation is
normal.
ng: An error has
been detected.