Masking Downstream Keys With Box Masks - Sony DFS-900M Operating Instructions Manual

Masking Downstream
Keys with Box Masks
You can use the Box Mask sub menu of the Keyer menu to
apply box masks to downstream keys.
To enable the Box Mask sub menu
BKDF-901
BKDF-902
1
When using the BKDF-901: Depending on the key
that you want to apply the box masks, press the
DSK1 or DSK2 button in the KEY
DELEGATION block, lighting it.
When using the BKDF-902: Depending on the key to
which you want to apply the box masks, press the
DSK1 or DSK2 button in the key/AUX bus
control block, lighting it.
2
Press the MASK button in the KEYER block, lighting
it.
Box mask is enabled, and the Box Mask sub menu
appears in the display panel.
To adjust the position of the box mask
Adjust the parameters of the Box Mask sub menu.
Operation Knob Parameter
Specify the F1 L (BoxMask
position of the Left)
left edge of the
box mask.
Specify the F2 R (BoxMask
position of the Right)
right edge of
the box mask.
Specify the F3 T (BoxMask
position of the Top)
top edge of the
box mask.
Specify the F4 B (BoxMask
position of the Bottom)
bottom edge of
the box mask.

Masking Downstream Keys with Box Masks

Settings
0 to 1024
0 to 1024
0 to 1024
0 to 1024
149