Mode Operations - Sony DFS-900M Operating Instructions Manual

3D Mode Operations
The following limitations apply to operations in 3D mode.
• The available transition types are limited to cut and mix
by button operations.
• When an operation on a DSK is performed, M/E keys
behave in the same way.
You cannot directly operate M/E keys.
The DSK1 and DSK2 values set in the menu are applied
to KEY1 and KEY2, respectively.
• Events created in 3D mode can be used only in 3D mode.
• Sequence functions are not available.
• A function which captures still images from input
signals is available only for the left signals.
When using the BKDF-901
Some buttons are not available (the buttons shown in black
in the following figure).
Operating block
KEYER block
KEY DELEGATION block KEY3, KEY4
Transition block
When using the BKDF-902
Instead of operating with the M/E Cross-Point Bus block
and the M/E Transition block, use the PROGRAM/
PRESET Cross-Point Bus block and the PROGRAM/
PRESET Transition block.
Some buttons are not available (the buttons shown in black
in the following figure).
174
3D Mode Operations
BKDF-901
Unavailable buttons
DME ENBL, CK, MASK
EDGE SHADOW
(EXT and SELF are disabled for
KEY1 and KEY2.)
TRANS PVW, KEY1 to KEY4
WIPE (FAM), DME (NAM)
PRIORITY, FTB
BKDF-902
Operating block Unavailable buttons
KEYER block DME ENBL, CK, MASK
EDGE SHADOW
(EXT and SELF are disabled for
KEY1 and KEY2.)
KEY DELEGATION KEY3, KEY4
block
M/E rows All buttons and the fader lever
PROGRAM/PRESET M/E buttons
Cross-Point Bus block
KEY DELEGATION KEY3, KEY4
block
DSK/Fade to Black FTB
Control block