Sony DFS-900M Operating Instructions Manual page 148

1
When using the BKDF-901: Depending on the key to
which you want to add the edges, press one of the
KEY1 to KEY4 buttons in the KEY
DELEGATION block, lighting it.
When using the BKDF-902: Depending on the key to
which you want to add the edges, press one of the
KEY1 to KEY4 buttons in the key/AUX bus
control block, lighting it.
2
Press the EDGE SHADOW button in the KEYER
block, lighting it.
Edges (Shadows) are enabled, and the Edge Shadow
sub menu appears in the display panel.
Edge Shadow sub menu parameters
Use the sub menus of the Edge Shadow sub menu to do the
following.
Sub menu
Edge Type (Type)
Edge Color (Color)
Edge Position (Position) Adjust the edge position.
To switch between sub menus, press the h and H
buttons in the numeric keypad.
Edge Type (Type) sub menu parameters
Operation Knob Parameter
Select the F1
edge type.
Adjust the F2
edge width.
Adjust the F3
edge softness
(amount of
blurring).
148
Adding Edges to Keys
Operation
Select the edge type, and specify
properties such as the edge width
and softness.
Adjust the edge color.
Settings
Normal: Normal
Typ (Type)
edges
Outline: Outline
Extrude: Drop
shadow
Shadow:
Shadow
Wid (Width) 1 to 8
Sft (Softness) 0.0 to 100.0
Operation Knob Parameter
When Extrude F4 Dir (Direction)
is selected,
specify the
edge
direction.
(Specify as a
position
corresponding
to a number
on the face of
an analog
clock.)
Example: 3
corresponds
to the
direction from
3 o'clock.
Edge Color (Color) sub menu parameters
Operation Knob Parameter
Adjust the F2 Lum (Luminance) 0.0 to 108.6
luminance of
the edges.
Adjust the F3 Sat (Saturation)
saturation
(color density)
of the edges.
Adjust the hue F4 Hue
of the edges.
Edge Position (Position) sub menu parameters
Operation Knob Parameter
When Shadow F2 PX (Position X) –100.0 to 100.0
is selected,
specify the X
coordinate of
the position
where the
shadow is
added.
When Shadow F3 PY (Position Y) –100.0 to 100.0
is selected,
specify the Y
coordinate of
the position
where the
shadow is
added.
Settings
0 to 11
Settings
0.0 to 100.0
0.0 to 359.5
Settings