Table of Contents
Advertisement
92
Basic Switcher Settings
BKDF-902
1
When using the BKDF-901: Press the AUX button.
When using the BKDF-902: From among the buttons AUX03 to AUX10,
press one to which analog output has been assigned.
The Aux (AUX output assignment settings) sub menu appears in the display
panel.
2
Press the h or H button in the numeric keypad until the Output (output
detailed settings) sub menu appears.
"Output" appears in the sub menu title display area. If it is already displayed
there, you can skip this step.
3
When using the BKDF-901: Rotate the F1 knob to select an item from
among AUX03 to AUX10 to which analog output has been assigned.
When using the BKDF-902: Skip to step 4.
4
Rotate the F2 knob to select the output signal type.
Compst: Analog composite signal
Y/CB/CR: Analog component (color difference) signal
GBR/wSync: Analog component (RGB) signal (sync signal multiplexed
into G signal)
Notes
• Analog HD component signals cannot be output.
• The following table lists the signals to be connected and the number
assigned to each input channel (see page 38).
BKDF-901
Advertisement
Table of Contents
