Sony DFS-900M Operating Instructions Manual page 143

Operation Knob Parameter
Specify the F2 Rot
rotation angle of (Rotation)
the turn.
Specify the F3 Ang (Peel
angle of the Angle)
turn.
Specify the size F4 Amt
of the turn. (Amount)
xxx Page Turn 2 (2)
Operation Knob Parameter
Select Page Roll F1 Typ (Type)
(roll the page
up) or Page
Turn (turn the
page up).
Specify the X F2 PX (Position
coordinate of X)
the center
position of the
page turn.
Specify the Y F3 PY (Position
coordinate of Y)
the center
position of the
page turn.
Specify the F4 Num (Num_
number of Segment)
segments in the
turn.
xxx Page Turn 3 (3)
Operation Knob Parameter
Specify the F2 Rad
radius of the (Radius)
turn.
Specify the F3 Spl (Spiral)
amount of
spiraling when
the turn width is
increased
stepwise.
Specify F4 Stg
staggering of (Stagger)
the turn
position.
Page Peel sub menu parameters
Adjust the following parameters to adjust the Page Peel
effect.
Settings
–8.000 to 8.000
–8.000 to 8.000
–2.000 to 2.000
The Page Peel sub menu has two pages. To switch between
pages, press the h and H buttons in the numeric
keypad.
(xxx: "M/E DME" appears if you are setting up a
Settings
transition, and "Keyer" appears if you are setting up a key.)
Turn: Page Turn
Roll: Page Roll xxx Page Peel 1 (1)
Operation
Select Page Roll
–8.000 to 8.000
(roll the page
up) or Page
Turn (turn the
page up).
Specify the
–8.000 to 8.000
rotation angle of
the peel.
Specify the
width of a strip
when peeling off
3 to 31
in strips.
Specify the
amount of
peeling.
xxx Page Peel 2 (2)
Settings
Operation
0.000 to 1.000
Specify the tilt of
the peel.
Specify the size
–8.000 to 8.000
of the distance
out to the peel.
Splits sub menu parameters
Adjust the following parameters to adjust the Splits effect
–8.000 to 8.000
The Splits sub menu has two pages. To switch between
pages, press the h and H buttons in the numeric
keypad.
Page Peel effect example
Knob Parameter Settings
Turn: Page Turn
F1 Typ (Type)
Roll: Page Roll
F2 Rot –8.000 to 8.000
(Rotation)
F3 Wid 0.000 to 1.000
(Peel_Width)
F4 Amt –2.000 to 2.000
(Amount)
Knob Parameter Settings
F3 Tlt (Tilt) –1.000 to 1.000
F4 Rad 0.000 to 1.000
(Radius)
Splits effect example
Customizing DME Effects
143