Adding Edges To Keys - Sony DFS-900M Operating Instructions Manual

KEY4 buttons in the key/AUX bus control block,
lighting it.
2
Press the MASK button in the KEYER section,
lighting it.
Key masks are enabled, and the Key Mask sub menu
appears in the display panel.
To select a mask pattern and change the
position or size of the pattern
Adjust the parameters of the Key Mask sub menu.
Operation Knob Parameter
Select a F1 Pat (Mask
pattern. Pattern)
Specify the X F2 PX (Pattern
coordinate of Center X)
the center
point of the
pattern.
Specify the Y F3 PY (Pattern
coordinate of Center Y)
the center
point of the
pattern.
Adjust the size F4 Siz (Pattern
of the pattern. Size)

Adding Edges to Keys

You can use the Edge Shadow sub menu of the Keyer
menu to add various types of edges to keys.
Settings
0 to 33, 38 to 40,
42 to 48, 65 to 69,
75 to 79, 85 to 94,
105 to 114
–1.000 to 1.000
Note
Edges cannot be added when you have selected chroma
key as the key type, and edges cannot be added to
downstream keys.
–1.000 to 1.000
To enable shadow edges
0.0 to 100.0
Key Edge (Shadow)
Edge example (Shadow)
BKDF-901
BKDF-902
Adding Edges to Keys
147