Sony DFS-900M Operating Instructions Manual page 109

Preview video
Multi-view screen example (10 partitions)
For details, see "Making multi-view output settings"
(page 95).
Cutting with the CUT button after checking
the next video in the preview screen
Use the CUT button to cut instantly after checking the
video in the preview screen.
When using the BKDF-901
1
In the transition block, press the BKGD next transition
selection button, lighting it.
2
In the cross-point bus block, press a PROGRAM
selection button to select the video that appears before
the cut.
The pressed button lights in red, and the selected video
becomes the program output video.
3
Press a PRESET selection button to select the video
that appears after the cut.
The pressed button lights in green, and the selected
video appears in the preview screen.
4
Press the CUT button.
The program output and preview output video are
switched instantly. The colors of the buttons in the
cross-point block change to reflect the switch.
Program video
Example: When PROGRAM selection button 1 and
PRESET selection button 4 are selected
Before pressing the CUT button
Lit in red
Lit in green
After pressing the CUT button
Lit in red
Lit in green
Each time the CUT button is pressed. the program
output video switches between the video signals
selected with the PROGRAM selection button and
PRESET selection button.
When using the BKDF-902
1
In the M/E transition block, press the BKGD next
transition selection button, lighting it.
2
Press an M/E bus A selection button in the M/E
cross-point bus block or a PROGRAM bus selection
button in the PROGRAM/PRESET cross-point bus
block to select the video that appears before the cut.
The pressed button lights in red, and the selected video
becomes the program output video.
3
Press an M/E bus B selection button in the M/E
cross-point bus block or a PRESET bus selection
button in the PROGRAM/PRESET cross-point bus
block to select the video that appears after the cut.
109
Switching Backgrounds