Sony DFS-900M Operating Instructions Manual page 71

525/59: SD signal (NTSC)
625/50: SD signal (PAL)
720/50: HD signal (720p/50 Hz)
720/59: HD signal (720p/59.94 Hz)
1080/50: HD signal (1080i/50 Hz)
1080/59: HD signal (1080i/59.94 Hz)
Note
Settings values are highlighted if they are different from the current setting
value.
5
Hold the F1 knob down for one second or longer.
A message appears to confirm the selection of the video format.
6
Press the F2 knob.
The video format selected in step 3 is confirmed.
To cancel the selection, press the F3 knob. This returns to the video format
selection screen of step 3.
Note
When you have changed the video format, you need to restart the switcher.
On how to power the switcher off, see "To power off" (page 59).
7
Rotate the F4 knob to set the system delay.
Normal: The frame synchronizers for the input connectors (see page 78)
are enabled automatically.
Min (Minimum): System delay is held to the minimum. If the frame
synchronizers for the input connectors are disabled, the delay with
respect to the reference sync signal is 1H.
Tip
The amount of system delay varies depending on DME and frame
synchronizer usage.
8
Restart the switcher.
Settings when an SD format (525/59 or 625/50) is selected
When an SD format is selected in steps 3 to 6, set the black setup level (SET)
with the F2 knob (for 525/59 only), and set the aspect (SD ASPECT) with the
F3 knob.
The selection items and what they select are as follows.
F2 knob (SET) setting
0.0%: Set the black setup level to 0%.
71
Basic Switcher Settings