Communications Protocol Settings; Baud Rate Settings; Parity Bit Settings - Sony DFS-900M Operating Instructions Manual

Communications Protocol Settings

Adjust the following parameters in the Protocol sub menu
to specify the communications protocol.
Knob Parameter Description
F1 1 RS-422A, port 1 Specify the serial
F2 2 RS-422A, port 2 GVG100, BVS3000,
F3 3 RS-422A, port 3 GVG100, BVS3000,
F4 4 RS-422A, port 4
(editor)
a) For each parameter, rotate the corresponding knob to select the serial
communications device to be connected. Select "---" if you do not want to
select a device.

Baud Rate Settings

Adjust the following parameters in the Baudrate sub menu
to set the baud rate.
Knob Parameter Description
F1 1 RS-422A, port 1 9600, 19200, 38400
F2 2 RS-422A, port 2 9600, 19200, 38400
F3 3 RS-422A, port 3 9600, 19200, 38400
F4 4 RS-422A, port 4
(editor)

Parity Bit Settings

Adjust the following parameters in the Parity sub menu to
set the parity bit.
Knob Parameter Description Settings
F1 1 RS-422A,
port 1
F2 2 RS-422A,
port 2
F3 3 RS-422A,
port 3
a)
Settings
communications
device to be
connected from
among the following:
GVG100, BVS3000,
HVS-AUX
HVS-AUX
HVS-AUX
GVG100, BVS3000,
HVS-AUX
Settings
9600, 19200, 38400
None: Do not use a
parity bit
Odd: Odd parity
Even: Even parity
None: Do not use a
parity bit
Odd: Odd parity
Even: Even parity
None: Do not use a
parity bit
Odd: Odd parity
Even: Even parity
Knob Parameter Description Settings
F4 4 RS-422A,
port 4
(editor)
None: Do not use a
parity bit
Odd: Odd parity
Even: Even parity
161
Serial Interface Settings