Inserting Keys By A Cut Transition - Sony DFS-900M Operating Instructions Manual

To set the chroma key cursor
Use the following procedure to specify whether the
chroma key cursor should be displayed in the program
screen or the preview screen.
BKDF-901
BKDF-902
1
When using the BKDF-901: If the SHIFT button of
the DME/SETUP block is not lit, press it to light it.
When using the BKDF-902: Skip to step 2.
2
Press the SYSTEM button.
A settings sub menu of the System sub menu appears
in the display panel.
3
Press the h or H button in the numeric keypad until
the Other sub menu appears.
"Other" appears in the sub menu title display area. If it
is already displayed there, you can skip this step.
4
Rotate the F1 knob to select PGM or PVW.
When using the BKDF-901
Knob Parameter Description
F1 Cursor The screen
where the
chroma key
cursor appears
When using the BKDF-902
Knob Parameter Description
F1 Cursor The screen
where the
chroma key
cursor appears.

Inserting Keys by a Cut Transition

BKDF-901
BKDF-902
1
Set up the key signal.
For information about how to set up keys, see "Setting
Up Keys" (page 121).
Settings
PGM: Program
screen
PVW: Preview
screen
Settings
M/E PGM:
Program
screen
M/E PVW:
Preview
screen
Using Keys to Compose Video
125