Knob Parameter Description
F2
F
GPI input
function
Settings
M/E Trn, M/E Cut, M/E
Mix, M/E Wipe, M/E
DME, M/E FAM, M/E
NAM, P/P Trn, P/P Cut,
P/P Mix, P/P Wipe,
DSK1 Cut, DSK1 Mix,
DSK2 Cut, DSK2 Mix,
FTB, SEQ Play
Tally Output Settings
This switcher can output 32 different tally signals. You can
assign the following tally output signals to tally/GPI
output pins of the TALLY/GPI OUT connector.
For more information about the pins of the TALLY/GPI
OUT connector, see "Pin Assignments" (page 205). For
more information about signal connection, see "Example
Connection of Tally/GPI Output" (page 208).
• R-BLK: Red tally to BLACK
• R-In01 to 24: Red tally to In01 to In24
• R-Stl1 to 4: Red tally to Stl1 to Stl4
• R-Mat1 to 4: Red tally to Mat1 to Mat4
• R-Rsv01 to R-Rsv07 (or 06)
expansion
• R-ME: Red tally to M/E (only when using the BKDF-
902)
• G-BLK: Green tally to BLACK
• G-In01 to 24: Green tally to In01 to In24
• G-Stl1 to 4: Green tally to Stl1 to Stl4
• G-Mat1 to 4: Green tally to Mat1 to Mat4
• G-Rsv01 to G-Rsv06 (or 05)
expansion
• Play: See "To set the GPI output" (page 165)'
• G-ME: Green tally to M/E (only when using the BKDF-
902)
• Alarm: Alarm
1) When using the BKDF-901: R-Rsv01 to R-Rsv07
When using the BKDF-902: R-Rsv01 to R-Rsv06
2) When using the BKDF-901: G-Rsv01 to G-Rsv06
When using the BKDF-902: G-Rsv01 to G-Rsv05
To change tally output settings
Use the Tally sub menu.
To display the Tally sub menu
In the External Connections and Power Block, press the
GPI button twice in quick succession.
TALLY/GPI OUT connector
1)
: Reserved for future
2)
: Reserved for future
Tally Output Settings
163