Page 31
(urban outdoors) and E4 (controlled EMC environment, ex. Wartungsarbeiten stets nur qualifiziertem Fachpersonal. TV studio). Pour le DVS-7150 et le BKDS-7017 For the customers in the USA This equipment has been tested and found to comply with Pour les clients européens the limits for a Class A digital device, pursuant to Part 15 of Ce produit portant la marque CE est conforme à...
Page 32
For BKDS-7001/7003/7113/7134/7163/7091/7110/2031/ WARNING (For BKDS-7017 only) M1690 This unit has no power switch. When installing the unit, incorporate a readily accessible For the customers in Europe disconnect device in the fixed wiring, or connect the power This product with the CE marking complies with the EMC cord to a socket-outlet which must be provided near the unit and easily accessible.
Features ................... 4(E) Optional Accessories ...............5(E) Peripheral Equipment Configuration..........7(E) Location and Function of Parts ............8(E) DVS-7150 Digital Video Switcher..........8(E) BKDS-7017 Switcher Control Panel (Rear) .........13(E) Example System Configurations ............14(E) Control Panel Connections ............14(E) Primary Input and Video Monitor Connections ......15(E) External Chroma Key Source Connections ........16(E)
Overview Overview Interface with external equipment The DVS-7150 Digital Video Switcher is a high- Since this switcher can be connected to units such as performance, multi-functional, composite (D2)/ the Sony DVS-6464B Routing Switcher, it can be built component (D1) format digital switcher for use in the construction of digital video systems.
BKDS-7163 Serial Digital Output Board Optional Accessories Provides output capability for serial digital signals, for use in composite or component systems. One BKDS- 7163 provides output capability for one channel. Up Processor accessories to ten of these boards can be installed in the switcher. BKDS-7110 Blank Input Adaptor Board BKDS-7280 M/E Preview Board Can accept up to 12 BKDS-7111/7113 boards.
Page 36
Overview BKDS-7001 Control Port Expansion Board Other related accessories Adds four RS-422A (D-sub 9-pin) interfaces. BKDS-7060 Keyer Remote Control Panel BKDS-7003 Source Name Display Unit Performs setting, adjustment and on/off switching of Displays signal names above the cross-point buttons in M/E keyers, downstream keyers, and so forth.
BKDS-7033 Memory Recall Control Panel Unit BKDS-7091 Redundant Power Supply Unit BKDS-M1690 Redundant Power Supply Unit BKDS-7280 M/E Preview Board DVS-7150 Digital Video Switcher BKDS-7134 Chromakey Analog Component Input Board BKDS-2031 Chromakey Board Composite/component system Composite system BKDS-7111 Analog Composite...
B switch is turned on. circuit. Turn the switch off and contact qualified Sony As shipped, the A switch turns on or off the built-in service personnel.
Page 39
Rear panel (inputs and outputs) 1 PRIMARY INPUTS 1 to 24 connectors 2 AUX BUS OUTPUTS 1 to 6 connectors 3 ME OUTPUTS 1, 2 connectors 4 PGM OUTPUTS connectors 1 to 4 5 EDIT PVW OUTPUT connector 6 REF INPUT connectors 7 REF OUTPUT connector 8 CRK INPUTS CH1, CH2 connectors 9 PVW OUTPUTS 1, 2 connectors...
Page 40
Location and Function of Parts 7 REF (reference) OUTPUT connector (BNC type) Used to output an analog reference video signal. Using control panel settings, the phase of the output signal can be adjusted from approximately –0.5 H to +1.5 H with respect to the phase of the input signal on the REF INPUT connector 6.
Page 41
Rear panel (control and power) 3 SERIAL TALLY connector 4 PANEL 1 connector 2 TERMINAL connector 5 DME 1, 2 connectors 1 GPI connector !º ⁄AC IN A and B connectors 9 y terminal 8 MATRIX/REMOTE 4 connector 7 EDITOR A, B / REMOTE 1, 2 connectors 6 PANEL 2/REMOTE 3 connector 1 GPI (general purpose I/O) connector 5 DME (digital multi effects) 1, 2 connectors (D-...
Page 42
If the optional BKDS-M1690 unit is installed, both the A and B connectors can be used. For more information on installing the BKDS-M1690, contact your Sony representative or qualified Sony service personnel. 12(E)
5 OPTION PANEL connector (D-sub 25-pin, RS- RS-422A compliant) 422A compliant) Used to connect to the DVS-7150 Digital Video Use the optional BKDS-7075 Control Panel Remote Switcher. The switcher is controlled through this Adaptor to connect option panels to the control panel.
PANEL 1 Reference signal 75-ohm terminator To AC supply DVS-7150 Digital Video Switcher a) For the power cord for the control panel, see “Optional accessories” (page 22(E)). b) For the power cord for the switcher, see “Optional accessories” (page 21(E)). 14(E)
Digital Routing Effects Switcher PFV-D100 Digital Video Interface Maximum 24 channels (with option boards installed) M/E program monitor PRIMARY DVS-7150 Digital Video Switcher INPUTS EDIT PVW Program output monitor OUTPUT Digital VTR ME OUTPUTS PGM OUTPUTS Edit preview monitor 15(E)
External Chroma Key Source Connections PFV-D100 Digital Video Interface Video camera Betacam VTR D1 VTR DVW-series VTR PRIMARY DVS-7150 Digital Video Switcher INPUTS Serial digital component signal inputs INPUTS Analog component inputs (maximum 2 channels) Video camera Betacam VTR D2 VTR...
Page 47
: Loop-through connection : 9-pin remote cable (RS-422A) DME 2 : 75-ohm coaxial cable DVS-7150 Digital Video Switcher K: Key signals V: Video signals a) In component mode: connect three cables, VIDEO/Y, KEY/Z, and Z In composite mode: connect four cables, VIDEO/Y, EXT/C, KEY/Z, and Z...
DME 1 : 9-pin remote cable (RS-422A) : 75-ohm coaxial cable DME 2 DVS-7150 Digital Video : Key signals Switcher : Video signals a) In component mode: connect three cables, VIDEO/Y, KEY/Z, and Z In composite mode: connect four cables, VIDEO/Y, EXT/C, KEY/Z, and Z...
BVE-9100 Editing Control System Connections BVE-9100 Editing Control VTR 1 System Program monitor VTR 2 Recording VTR DME-7000 Digital Multi Effects Edit preview monitor AUX/PGM/PVW/EDIT PVW/ PRIMARY OUTPUTS INPUTS EDITOR-B EDITOR-A DVS-7150 Digital Video Switcher 19(E)
Design and specifications are subject to change without notice. Analog black burst signal or analog sync signal input, BNC (× 2), 75 Ω, with loop-through Signal level: 0±3 dB DVS-7150 Digital Video Switcher SCH phase: 0 ° ±20° ME OUTPUTS General • When using BKDS-7163 Serial digital video signal output, BNC (×...
Page 51
EDIT PVW OUTPUT D-sub 25-pin • When using BKDS-7163 Eight TTL inputs, four relay Serial digital video signal output, BNC (× 1), 75 Ω contact outputs (30 V AC/DC Signal level: 800 mV ±10% max., 0.1 A), four open collector Transmission rate: 270 Mbps (component)/143 Mbps outputs (composite)
Specifications Optional accessories BKDS-7017 Switcher Control Panel AC power cord • For customers in the USA and Canada General DK-2401 (UC): Power cord (125V, 10A, 2.4 m (8 feet)) Plug retainer Power requirements 100 to 240 V AC ±10%, 50/60 Hz •...
BKDS-7003 Source Name BKDS-7030 Key Frame Control Display Unit Panel Product configuration Power requirements 5 V ±0.2 V DC LE-147 board (2) 12 V ±0.5 V DC LE-148 board (2) LE-180 board (1) Power consumption DC-92 board (5) 5 W max. Power requirements Temperature range 5 V ±0.2 V DC...
Specifications BKDS-7033 Memory Recall BKDS-7091 Redundant Power Control Panel Unit Supply Unit Power requirements Power requirements 5 V ±0.2 V DC 100 to 240 V AC ±10%, 50/60 Hz 12 V ±0.5 V DC 5 V ±0.2 V DC (9 A max.) Output 12 V ±0.2 V DC (12 A max.) Power consumption...
Input BKDS-7113 Serial Digital Input Board Input signal With BKDS-7113 installed: Serial digital video (800 mV±10%) General With BKDS-7111 installed: Analog composite video (1 Vp-p, 75 Ω) Number of inputs 12 Power requirements ±5 V ±0.2 V DC 3.3 V ±0.2 V DC Power consumption BKDS-7111 Analog Composite 3 W max.
Specifications BKDS-7134 Chromakey Analog BKDS-7161 Analog Composite Component Input Board Output Board General General Power requirements Power requirements ±5 V ±0.2 V DC ±5 V ±0.2 V DC 3.3 V ±0.2V DC 3.3 V ±0.2 V DC Power consumption Power consumption 16 W max.
BKDS-7163 Serial Digital Output BKDS-7280 ME PVW Board Board Power requirements 3.3 V ±0.2 V DC General Power consumption 1 W max. Power requirements Temperature range ±5 V ±0.2 V DC Operation guaranteed: 5°C to 40°C (41°F to 104°F) 3.3 V ±0.2 V DC Performance guaranteed: 10°C to 35°C (50°F to Power consumption 95°F)
Specifications Input Selected from the dedicated inputs (BKDS-7134). For component video, it is also possible to take input from the primary inputs. Input format Composite operation: 4:4:4 (using BKDS-7134) Component operation: 4:4:4 (using BKDS-7134), 4:2:2 or 4:4:4 (using primary inputs) Functions Oversampling Color modification (for foreground)
Page 59
The material contained in this manual consists of information that is the property of Sony Corporation and is intended solely for use by the purchasers of the equipment described in this manual. Sony Corporation expressly prohibits the duplication of any...