Ricoh D065 Service Manual page 539

Service Program Mode Tables
Center Lamp Temp (Small Size
005
Paper)
End Lamp Actual Time (Small
006
Size Paper)
007 Center Lamp Temp (Thick Paper)
End Lamp Actual Time (Thick
008
Paper)
Japan only
009 Capacitator for Check Start
Fusing Temperature
Japan only
010 Capacitator for Check Start
Fusing Lamp ON Time
1109 Measure Nip Width
001 Execute
002 Adjust Value
1112 Hot Roller Temperature for Auto Process Control
Sets the temperature of the hot roller for auto process control to start.
001
[70 to 150/140/1°C] DFU
1159 Fusing Jam: SC Setting
This SP determines what the machine does if paper jams occur in the fusing unit
for three consecutive sheets of paper.
001
0: (default): A jam alert is shown on the screen. The customer can remove the
jam and the machine works normally after that.
D062/D063/D065/D066
D062/D063/D065: [180 to 205/205/1 deg C]
D066: [175 to 190/190/1 deg C]
D062/D063/D065: [0 to 120/60/1 sec.]
D066: [0 to 60/10/1 sec]
D062/D063/D065: [180 to 205/205/1 deg C]
D066: [175 to 200/200/1 deg C]
D062: [0 to 120/0/1 sec.]
D063/D065: [0 to 120/5/1 sec.]
D066: [0 to 120/10/1 sec.]
C4c: [170 to 205/200/1 deg C]
C4c: [0 to 120/0/1 sec.]
0 or 1
[200 to 400/300/10mm]
4-6 SM Appendix