Ricoh D065 Service Manual page 535

Service Program Mode Tables
1002* Side-to-Side Registration
Adjusts printing side-to-side registration for each feed station, using test pattern
(SP2902-003, No.18).
These SP's should be adjusted after replacing the laser synchronization detector
or the laser optical unit.
001 Tray-1
002 Tray-2
003 Tray-3
004 Tray-4 (Japan Only)
005 By-pass Tray
006 LCT
007 Duplex Tray
1003 Registration Buckle Adjustment
Adjusts the registration motor timing. This timing determines the amount of
paper buckle at registration. (A higher setting causes more buckling.)
[–9 to +9/0/1 mm]
001* Tray LCT
002 Duplex Tray
003* By-pass Tray
1007 By-pass Feed Paper Size Display
Use this SP to confirm the size of the paper detected in the by-pass tray if paper
-001
is skewing during feeding.
1008* Duplex Fence Adjustment
D062/D063/D065/D066
[–9 to +9/0/0.1 mm]
4-2 SM Appendix