Ricoh D065 Service Manual page 687

Service Program Mode Tables
direction of paper feed.
001 A3 SEF
002 B4 SEF
003 A4 SEF
004 A4 LEF
005 B5 SEF
006 B5 LEF
007 DLT SEF
008 LG SEF
009 LT SEF
010 LT LEF
011 12" x 18"
012 Other
6106 Adjust Output Jog Position
Use this SP code to adjust the positions of the jogger fences when the pages
are aligned (jogged) horizontally in the optional output jogger unit. The jogger
fences close in on the sides of the stack on the paper tray. These side fences
move in and out perpendicular to the direction of paper feed.
[-1.5 to +1.5 / 0 / 0.5 mm]
The higher the setting, the narrower the jogger span and the smaller the
gaps between the fences and the edges of the paper. Stacking is tighter.
The lower the setting, the wider the jogger span and the wider the gaps
between the fences and the edges of the paper. Stacking is not as tight.
001 A3 SEF
002 B4 SEF
D062/D063/D065/D066
[-1.5 to +1.5/0/0.5 mm]
+ Value: Increases the distance between jogger
fences and the sides of the stack.
- Value: Decreases the distance between the jogger
fences and the sides of the stack.
The settings are done for each paper size.
SEF denotes "Short Edge Feed".
4-154 SM Appendix