Ricoh D065 Service Manual page 775

Input/Output Check
1. Enter the SP mode and select SP5803.
2. Enter the number (1 to 13) for the item that you want to check. A small box will be
displayed on the SP mode screen with a series of 0's and 1's.
The meaning of the display is as follows.
Bit 7 6 5 4 3 2 1 0
Setting 1 1 0 0 1 0 1 0
3. Check the status of each item against the corresponding bit numbers listed in the table
below.
SP5803-001: Paper Feed 1
Bit
7 Rear Side Fence Close Sensor
6 Rear Side Fence Open Sensor
5 Front Side Fence Close Sensor
4 Front Side Fence Open Sensor
3 Near End Sensor
2 Paper Height 1 Sensor
1 Paper Height 2 Sensor
0 Paper Height 3 Sensor
SP5803-002: Paper Feed 2
Bit
7 2nd Paper Size Switch
D062/D063/D065/D066
Description
Description
4-242
Reading
0
Activated Deactivated
Activated Deactivated
Activated Deactivated
Activated Deactivated
(see tables below)
Reading
0
See Paper Size Tables Below
1
0
SM Appendix