Ricoh D065 Service Manual page 684

Allows settings for the velocity of the sheet through.
[-5 to 5/0/0.1]
ADF Skew Correction Mode In/Out
If the original is small (B6, A5, HLT), the delay sensor detects the leading edge of
the sheet and delays the original at the entrance roller for the prescribed number
of pulses to buckle the leading edge and correct skew.
6020*
[0 to 1/1]
0: Delay skew correction only for small originals
1: Delay skew correction for all originals, regardless of size. (May reduce the
scanning speed of the ADF)
6101 Punch Hole Position Adjustment
Adjusts the punch hole positions in the direction of paper feed.
NA: North America
JPN: Japan
EU: Europe
NEU: Northern Europe (Scandinavia)
001 JPN/EU: 2-Hole
002 JPN/NA: 3-Hole
003 EU: 4-Hole
004 NEU: 4-Hole
005 NA: 2-Hole
006 JPN: 1-1Hole
6102 Punch Hole Position Adjustment
Adjusts the punch position perpendicular to the direction of feed.
SM Appendix
Service Program Mode Tables
[-7.5 to +7.5/0.5 mm]
+ Value: Shifts punch unit in the direction of feed.
- Value: Shift punch unit against direction of feed.
4-151 D062/D063/D065/D066