Ricoh D065 Service Manual page 490

Jogger Top Fence Motor: 3K Finisher B830
The top fence HP sensor detected that:
The top fence did not arrive at the home position within the specified number
775 B
of pulses.
-or-
The top fence failed to leave the home position within the specified number
of pulses.
If the jogger top fence motor is operating:
1. Top fence HP sensor harness loose, broken, defective
2. Top fence HP sensor defective
If the jogger top fence motor is not operating:
1. Motor blocked by an obstruction
2. Motor harness loose, broken, defective
3. Motor defective
4. Finisher main board defective
Jogger Bottom Fence Motor (B830)
The bottom fence HP sensor detected that:
776 B
The bottom fence did not arrive at the home position at the specified time.
-or-
The bottom fence failed to leave the home position at the specified time.
If the jogger bottom fence motor is operating:
1. Bottom fence HP sensor harness loose, broken, defective
2. Bottom fence HP sensor defective
If the jogger bottom fence motor is not operating:
1. Motor blocked by an obstruction
2. Motor harness loose, broken, defective
3. Motor defective
4. Finisher main board defective
SM Appendix
Service Call Conditions
3-45 D062/D063/D065/D066