Ricoh D065 Service Manual page 769

Service Program Mode Tables
005 Bit Switch 5
Show "Collate Type", "Staple Type" and
"Punch Type" buttons on the operation
panel.
If enabled, users will be able to configure a Collate Type, Staple Type, and
bit 0
Punch Type from the operation panel. The available types will depend on
the device and configured options.
After enabling the function, the settings will appear under:
"User Tools > Printer Features > System"
bit 1 DFU
bit 2 DFU
bit 3 [PS] PS Criteria
Change the number of PS criterion used by the PS interpreter to
determine whether a job is PS data or not.
Pattern3: includes most PS commands.
Pattern1: A small number of PS tags and headers
bit 4 Increase max number of the stored jobs
to 1000 jobs.
Enable: Changes the maximum number of jobs that can be stored on the
HDD via Job Type settings to 1000. The default is 100.
bit 5 Face-up output
Enable: All print jobs will be output face-up in the destination tray.
bit 6
Method for determining the image
rotation for the edge to bind on.
Enable: the image rotation will be performed as they were in the
specifications of older models for the binding of pages of mixed orientation
jobs.
The old models are below:
- PCL: before October 2004 models
D062/D063/D065/D066
Pattern3
4-236
0 1
Disable Enable
- -
- -
Pattern1
Disable Enable (1000)
(100)
Disable Enable
Enable
Disable
SM Appendix