Ricoh D065 Service Manual page 483

Service Call Conditions
Exit guide motor
The status of the exit guide
725 B
sensor did not change at the
prescribed time during operation
of the exit guide.
Front shift jogger motor error (B703)
The sides fences do not retract
within the prescribed time after
726 B
the shift jogger motor switches
on. The 1st detection failure
issues a jam error, and the 2nd
failure issues this SC code.
Rear shift jogger motor (B703)
The side fences do not retract
within the prescribed time after
727 B
the shift jogger motor switches
on. The 1st detection failure
issues a jam error, and the 2nd
failure issues this SC code.
Shift jogger retraction motor error (B703)
The side fences do not retract
within the prescribed time after
728 B
the retraction motor switches on.
The 1st detection failure issues
a jam error, and the 2nd failure
issues this SC code.
D062/D063/D065/D066
Exit guide open sensor loose, broken,
defective.
Exit guide motor defective
Finisher main board defective
Shift jogger motor disconnected,
defective
Shift jogger motor overloaded due
to obstruction
Shift jogger HP sensor
disconnected, defective
Motor harness disconnected, loose,
defective
Motor defective
Motor overload
HP defective
Motor harness disconnected, loose,
defective
Motor defective
Motor overload
HP defective
3-38 SM Appendix