Ricoh D065 Service Manual page 536

Adjusts the distance between front and rear fences. A smaller value shortens the
distance. If the fences are too far apart, skewing may occur in the duplex tray. If
the fences are too close, the paper may be creased in the duplex unit.
[–5 to +5/0/0.1 mm]
1102 Fusing Temperature Adjustment
Adjusts the temperature of the fusing units.
Duplex Actual Temperature
001
[0 to 1 /0/1]
Duplex Balance Temp (Center Thermistor)
002
[-30 to 0/-15/1]
Duplex Balance Temp (End Thermistor)
003
[-30 to 0/-15/1]
1103 Fusing Idling
IdlingTime (Normal)
D062/D063: [0 to 300 /0/1sec] *For only TWN [0 to300/8/1sec]
001
D065: [0 to 300 /26/1sec] *For only TWN [0 to300/28/1sec]
D066: [0 to 300 /160/1sec]
IdlingTime (Low)
D062/D063: [0 to 300 /66/1sec] *For only TWN [0 to300/68/1sec]
-002
D065: [0 to 300 /86/1sec] *For only TWN [0 to300/88/1sec]
D066: [0 to 300 /200/1sec]
IdlingTime (LowPower)
003 D062/D063/D066: [0 to 300 /0/1sec]
D065: [0 to 300 /15/1sec]
Japan only
004 IdlingTime (LowVoltage)
*For only C4c (DOM): [0 to 300 /8/1sec]
005 Japan only
SM Appendix
Service Program Mode Tables
4-3 D062/D063/D065/D066