Ricoh D065 Service Manual page 676

[0 to 1/0/1]
Common Key Info Writing
5870
Writes to flash ROM the common proof for validating the device for NRS
specifications.
001 Writing Note: These SPs are for future use and currently are not used.
Initializes the set certification.
When the GW controller board is replaced with a new one for
repair, you must execute the "Initiralize (-003)" and "Writing (-001)"
003 Initialize
just after the new board replacement.
NOTE: Turn off and on the main power switch after the "Initiralize
(-003)" and "Writing (-001)" have been done.
SD Card Appli Move
5873
Allows you to move applications from one SD card another.
001 Move Exec Executes the move from one SD card to another.
002 Undo Exec This is an undo function. It cancels the previous execution.
SC Auto Reboot
This SP determines whether the machine reboots automatically when an SC
5875
error occurs.
Note: The reboot does not occur for Type A and C SC codes.
001 Reboot Setting
[0 to 1/0/1]
0: On, 1: Off
On: default: 0 (Reboots automatically) The machine reboots automatically when
the machine issues an SC error and logs the SC error code. If the same SC
occurs again, the machine does not reboot.
OFF: 1 (Does not reboot automatically. Changing this setting to "0" sets the
SM Appendix
Service Program Mode Tables
4-143 D062/D063/D065/D066