Ricoh D065 Service Manual page 665

Service Program Mode Tables
Bit0 = 1 Sender specification required (if set to 1, Bit6 is set to "0")
Delivery Svr Capability (Ext)
Changes the capability of the registered that the I/O device registered.
011
Bit7 = 1 Address book usage limitation (Limitation for each authorized user)
Bit6 = 1 RDH authorization link
Bit5 to 0: Not used
Server Scheme (Primary) DFU
013
This is used for the scan router program.
Server Port Number (Primary) DFU
014
This is used for the scan router program.
Server URL Path (Primary) DFU
015
This is used for the scan router program.
Server Scheme (Secondary) DFU
016
This is used for the scan router program.
Server Port Number (Secondary) DFU
017
This is used for the scan router program.
Server URL Path (Secondary) DFU
018
This is used for the scan router program.
Rapid Sending Control
Enables or disables the prevention function for the continuous data sending
022
error.
[0 to 1 / 0 / -]
0: Disable, 1: Enable
5846 UCS Settings
D062/D063/D065/D066
[0 to 255 / 0 / 1 /step]
*CTL -
4-132 SM Appendix