Ricoh D065 Service Manual page 685

Service Program Mode Tables
[-2 to +2/0/0.4 mm]
+ Value: Shifts punch unit toward back of the finisher.
- Value: Shift punch unit toward front of the finisher.
NA: North America
JPN: Japan
EU: Europe
NEU: Northern Europe (Scandinavia)
001 JPN: 2-Hole
JPN/NA:
002
3-Hole
003 EU: 4-Hole
004 NEU: 4-Hole
005 NA: 2-Hole
6103 Skew Correction: Buckle Adj.
This SP corrects punch hole alignment by correcting the skew of each sheet.
To do this, it adjusts the amount of time the finisher entrance roller remains off
while the exit roller of the machine remains on. This buckles the leading edge
of the sheet slightly against the finisher entrance roller while it remains off.
001 A3 SEF
002 B4 SEF
003 A4 SEF
004 A4 LEF
005 B5 SEF
006 B5 LEF
007 DLT SEF
D062/D063/D065/D066
[-5 to +5/0/0.25 mm]
+ Value: Increases the time that the finisher entrance roller
remains off.
- Value: Descreases the time that the finisher entrance
roller remains off.
4-152 SM Appendix