Ricoh D065 Service Manual page 488

Finisher punch motor error
The punch HP sensor is not
activated within the specified
760 D
time after the punch motor turned
on. The 1st detection failure
issues a jam error, and the 2nd
failure issues this SC code.
Finisher folder plate motor error
The folder plate moves but is not
detected at the home position
761 B
within the specified time. The 1st
detection failure issues a jam
error, and the 2nd failure issues
this SC code.
Punch movement motor error
Occurs during operation of the
763 D
punch unit. The 1st detection
failure issues a jam error, and the
2nd failure issues this SC code.
Paper position sensor slide motor error
Occurs during operation of the
764 D
punch unit. The 1st detection
failure issues a jam error, and the
2nd failure issues this SC code.
SM Appendix
Service Call Conditions
Punch HP sensor disconnected,
defective
Punch motor disconnected,
defective
Punch motor overload due to
obstruction
Folder plate HP sensor
disconnected, defective
Folder plate motor disconnected,
defective
Folder plate motor overloaded due
to obstruction.
Motor harness disconnected, loose,
defective
Motor defective
Motor harness disconnected, loose,
defective
Motor defective
3-43 D062/D063/D065/D066