Ricoh D065 Service Manual page 731

Service Program Mode Tables
engineer using the SP modes are not counted.
When using secure printing (when a password is required to start the print job), the job
is counted at the time when either "Delete Data" or "Specify Output" is specified.
When a copy job on the document server is printed, SP8022 also increments, and
when a print job stored on the document server is printed, SP8024 also increments.
When an original is both copied and stored on the document server, the C: and L:
counters both increment.
When a print job is stored on the document server, only the L: counter increments.
When the user presses the Document Server button to store the job on the document
server, only the L: counter increments.
When the user enters document server mode and prints data stored on the document
server, only the L: counter increments.
When an image received from Palm 2 is received and stored, the L: counter
increments.
When the customer prints a report (user code list, for example), the O: counter
increments.
8011 T:Jobs/LS
8012 C:Jobs/LS
8014 P:Jobs/LS
8015 S:Jobs/LS
8016 L:Jobs/LS
8017 O:Jobs/LS
When a scan job is sent to the document server, the S: counter increments. When you
enter document server mode and then scan an original, the L: counter increments.
When a print job is sent to the document server, the P: counter increments.
When a network application sends data to the document server, the O: counter
increments.
When an image from Palm 2 is stored on the document server, the O: counter
increments.
D062/D063/D065/D066
These SPs count the number of jobs stored to the document server
by each application, to reveal how local storage is being used for
input.
[0 to 9999999/ 0 / 1]
The L: counter counts the number of jobs stored from within the
document server mode screen at the operation panel.
4-198 SM Appendix