Activating The New Pager Function - Yaesu FTM-100DR Operating Manual

8
Press and hold
Sets your station pager code and returns the display to the previously viewed
screen.
Tip
You can also return to the previous screen by pressing
Tips
• Even if the first and second parts of the pager code are reversed, for example, [47 05] from [05 47],
they are still recognized as the same code.
• If multiple stations set the same pager code, they can be called simultaneously.

Activating the new pager function

1
Press and hold
The Setup menu appears.
2
Rotate the DIAL to select [4 SIGNALING], then press
.
The menu list appears.
3
Rotate the DIAL to select [4 SQL TYPE], then press
.
4
Rotate the DIAL to select [PAGER], then press
for over one second.
Tips • Rotating the DIAL changes the squelch type in the
following order:
"OFF", "TONE ENC", "TONE SQL", "REV TONE",
"DCS", "PR FREQ", "PAGER", "DCS ENC"*, "TONE
DCS"*, "DCS TSQL"*
* To display these squelch types, from the Setup menu,
select [4 SIGNALING] → [9 SQL EXPANSION]
followed by "1 ON".
• Instead of following the steps 1 to 4 above, the squelch
type may be changed by pressing
for over one second.
Displays on the screen.
The operating band enters standby mode for receiving in the pager mode.
for over one second.
for over one second.
and holding
Communicating with specific stations
3 times.
87