Yaesu FTM-100DR Operating Manual page 113

4
Rotate the DIAL to select [1 COM PORT SETTING],
then press
The detail settings screen appears.
5
Rotate the DIAL to select [COM OUTPUT], then
press .
6
Rotate the DIAL to select "PACKET", then press
"OFF" → "GPS OUT" → "PACKET" → "WAYPOINT"
Tip The default setting: OFF
7
Rotate the DIAL to select [COM SPEED], then press
.
8
Rotate the DIAL to select the desired communication speed, then press
The setting changes in the following order.
"4800 bps" → "9600 bps" → "19200 bps" → "38400 bps" → "57600 bps"
Tip The default setting: 9600 bps
9
Press .
10
Rotate the DIAL to select [2 DATA SPEED], then
press .
The detail settings screen appears.
11
Rotate the DIAL to select [DATA], and then press
.
12
Rotate the DIAL to select the desired packet communication speed, then press
.
Rotating the DIAL changes the speed between "1200 bps" and "9600 bps".
Tip
The default setting: 1200 bps
13
Press .
.
Connecting an external device
.
.
113