New Two-Tone Ctcss Pager Function; Using The Pager Function; Setting The Code For This Station - Yaesu FTM-500DR Advance Manual

New Two-Tone CTCSS Pager Function

When using FTM-500DR/DE transceivers with a group of friends, setting the Two-Tone
CTCSS personal codes allows calling just the specific stations. Even when the person
who is called is not near the transceiver, the information on the LCD indicates that a call
was received.
The new two-tone CTCSS pager feature does not operate in digital mode. Press the [D X]
key to change from Digital to Analog FM or the AMS function.

Using the Pager Function

1. Press the FUNC knob  [SQL]  Press the FUNC knob
2. Rotate the FUNC knob to select [PAGER] then press the FUNC knob.
3. Press the DIAL knob, SUB DIAL knob or PTT switch to finish the setting and return
to the original screen.

Setting the Code for this Station

Set the "pager code" to be called by other stations.
1. Activate the pager function (refer to "Using the pager function" above).
2. Press and hold the FUNC knob  [48 PAGER CODE]  Press the FUNC knob
3. Rotate the FUNC knob to select [RX CODE 1] then
press the FUNC knob.
4. Rotate the FUNC knob to select the RX CODE 1 of the
code from 01 to 50.
5. Press the FUNC knob.
6. Rotate the FUNC knob to select [RX CODE 2] then
press the FUNC knob.
7. Rotate the FUNC knob to select the RX CODE 2 of the
code from 01 to 50.
The same code cannot be used for RX CODE 1 and
RX CODE 2.
Next, set the pager code for directing a call to a specific partner station.
8. Rotate the FUNC knob to select [TX CODE 1] then press the FUNC knob.
9. Rotate the FUNC knob to select the TX CODE 1 of the codes from 01 to 50.
10. Press the FUNC knob.
12
SIGNALING
48 PAGER CODE
RX CODE 1 05
RX CODE 2 47
TX CODE 1 05
TX CODE 2 47
SIGNALING
48 PAGER CODE
RX CODE 1 05
RX CODE 2 47
TX CODE 1 05
TX CODE 2 47
SIGNALING
48 PAGER CODE
RX CODE 1 05
RX CODE 2 47
TX CODE 1 05
TX CODE 2 47