Adjusting The Squelch Level - Yaesu FTM-100DR Operating Manual

Receiving

Adjusting the squelch level

Annoying noises can be eliminated when there is no signal present. The A-band and
B-band squelch levels can be individually adjusted. Increasing the squelch level will be
more effective in reducing noise; however setting the squelch level too high may block
weak signals. Adjust the squelch level as required.
1
Press .
The current squelch level is shown on the sub-band
display and on the SQL meter.
Tip In digital mode, noise does not occur even if the squelch
level is set to 0.
2
Rotate the DIAL to adjust the squelch level.
The squelch level value is shown on the sub-band
display, and the level is displayed on the SQL meter.
Tip The display returns to the normal operating screen three
seconds after the squelch is adjusted, or if no adjustment
is made.
36