Input Characters; Switching The Character Type; Deleting The Input Characters; Moving The Cursor To The Left - Yaesu FTM-100DR Operating Manual

Name and function of each component
● GPS INFO screen
While a received station's information is displayed,
briefly press the
screen.
May also display the compass and the signal level of
each acquired satellite. □ indicates an un-acquired
satellite and ■ indicates an acquired satellite.
Tip From [1 DISPLAY] → [4 GPS INFORMATION], you can
select "LOCATION" (location display) or "FREQUENCY"
(frequency display).

Input characters

You can input letters and characters to enter your call sign and memory channel tags by
following the procedure below.
Switching the character type
Press (
character type in the following order.
Uppercase letters → symbols → lowercase letters → numbers
Deleting the input characters
Press (
Deletes all characters to the right side of the cursor including the character on which the
cursor is currently positioning.
Moving the cursor to the left
Press (
Moving the cursor to the right
Press (
Deleting the most recently input character
Press (
Completing input
Press . To cancel inputting, press
20
key to display the GPS INFO
appears on the upper display). Pressing each time changes the
appears on the upper display).
appears on the upper display).
appears on the upper display).
appears on the upper display).
.
[Location display]
[Frequency display]