Setup Menu Operations: 14 Callsign; Changing The Call Sign (1 My Callsign (Digital)) - Yaesu FTM-100DR Operating Manual

Setup menu operations: 14 CALLSIGN

Changing the call sign (1 MY CALLSIGN (DIGITAL))

The call sign ID registered to the transceiver may be changed using the set menu.
1
Press and hold
The Setup menu appears.
2
Rotate the DIAL to select [14 CALLSIGN], then
press .
3
Press .
The currently registered call sign ID is shown.
4
Press .
The first letter of the call sign ID blinks.
5
Rotate the DIAL to select the desired letter, then press
upper row).
The cursor movers to the right.
Tips
• Up to 10 alphanumeric characters including hyphen and slash may be input.
• To switch the input screen (uppercase letters, lowercase letters, symbols and numbers),
press
• To delete the letter you have just input, press
• To move the cursor to the left, press
• To delete the letter you have just entered and move the cursor to the left, press
(
6
Repeat step 5 to complete to input the new call sign.
7
Press .
Displays the new call sign.
8
Press and hold
Sets the call sign and returns the display to the previously viewed operating screen.
150
for over one second.
( appears on the upper side).
appears on the upper row).
for over one second.
(
( appears on the upper side).
( appears on the upper side).
appears on the